دوره 16، شماره 1 - ( 10-1400 )                   جلد 16 شماره 1 صفحات 90-79 | برگشت به فهرست نسخه ها


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Dirikvand T, Zadsar M, Neghabi M, Amighian J. Improvement of Quality Factor and Reduction of Spectral Bandwidth of Microcavity OLED by Bragg Mirrors. IJOP 2022; 16 (1) :79-90
URL: http://ijop.ir/article-1-500-fa.html
Improvement of Quality Factor and Reduction of Spectral Bandwidth of Microcavity OLED by Bragg Mirrors. . 1400; 16 (1) :79-90

URL: http://ijop.ir/article-1-500-fa.html


چکیده:   (1235 مشاهده)
A green microcavity organic light-emitting diode combining an Al electrode (top mirror) with a distributed Bragg reflector (bottom mirror) was designed and fabricated to improve the quality factor (more than 51) and enable high reflectance and optimal electrical properties. Experimental results indicated a remarkable increase in electroluminescence and reduction of spectral width at half maximum. Distributed Bragg reflector (DBR) films were prepared at 550°C with a surface roughness of 0.25nm (root mean square: RMS). In addition, according to SiO2/TiO2 refractive indices, they obtained the highest reflection compared to all organic or inorganic DBR devices. The reflectance peak at 591 nm is 94.4% for five pairs of SiO2/TiO2 layers indicating good agreement with theoretical simulation samples. Microcavity Organic Light-Emitting Diode (OLED) with structure: 5 pairs of SiO2/TiO2/ITO(120nm) /MoO3(5nm) /MoO3:NPB(190nm) /NPB(10nm) /Alq3(35nm) /BCP(5nm) /LiF(0.7nm) /AL(200nm) has a quality factor of more than 51, high luminous (30%), remarkable increase in electro-luminescence (EL) and reduction of the spectral full width at half maximum of 10.93nm. This is an applied research that was obtained after detailed investigations on OLED microcavities and has a practical aspect to solving the problems of designing and manufacturing electrical and optical systems such as organic display screens. The innovative aspect of research in the technical knowledge of designing and manufacturing OLED microcavities and achieving an optimal structure using metal mirrors and Bragg reflectors to achieve coherent light output is a new and up-to-date issue that has not been done in Iran so far. As an essential step toward realizing organic lasers, the proposed approach can be used to produce new light sources.
     
نوع مطالعه: پژوهشي | موضوع مقاله: لیزرها، تقویت کننده‌‏های اپتیکی و اپتیک لیزر
دریافت: 1401/4/31 | ویرایش نهایی: 1401/7/30 | پذیرش: 1401/7/30 | انتشار: 1401/10/2

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | International Journal of Optics and Photonics

Designed & Developed by : Yektaweb